Skip to content

Adhesive glue for glass

Deepmaterial manufacturing custom adhesives
for glass application

Industrial adhesive application for glass

DeepMateriacl is the best industrial adhesives for glass

Deepmaterial is a China industrial adhesive manufacturer specializing in (supplying) adhesives for glass. We have been manufacturing high quality adhesives for over 10 years. From metal, wood, and foam to cardboard, plastic, and glass, our industrial adhesives have been developed and enhanced over time to adhere to almost any product and material via adhesion or cohesion.

For Glass

For Glass

Glass glue is generally divided into single-component and two-component. Generally speaking, one-component silicone glass glue can be used immediately, and can be applied directly from the glue gun to the desired surface, which is very convenient and is generally used for home decoration.

 

When the glass glue sticks, it will gradually bond, developing from the surface to the inner layer, and the adhesion time of different adhesives is different. 5-10 minutes for ordinary acidified glue and neutral transparent glue, 30 minutes for neutral variegated glue. If touch-ups or touch-ups are required, you must wait until the glue dries. then continue.

 

The curing time of glass glue increases with the increase of bonding thickness, and the curing time also increases accordingly. For example, it takes 3.4 days for 12mm thick acid glass glue to fully cure. When using glass glue, be sure to check whether it is completely cured, and use it after the bond is firm.

 

Glass glue gluing steps Before using glass glue, first clean the joint surface and keep it clean, then apply a layer of plastic tape near the interface, install the pointed tube, open and close at 45°, install the glue gun, and Press out the glue material at a 45° angle at the seam, so that the glue is in full contact with the surface of the substrate, and the sealant is tightly in contact. Eventually the tape comes off, cut it with a razor blade, and tear it apart.

 

There are endless glass glue, but also pay attention to the preservation method, it is best to store it in a cool and dry room, below 30 ℃, so that the glass glue can be properly preserved.

 

Finding the right the glue used for glass, needs involves choosing likely candidates and testing them in your application. Knowing more about how adhesion works can help you find the right path, so contact us, the DeepMaterial’s expert will give you the true help.